标准号及标准名称


被替代的旧标准

执行日期

EN 81-3:2000+A1:2008

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

 

 

EN 81-3:2000+A1:2008/AC:2009

EN 81-31:2010

Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts

 

 

EN 81-40:2008

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

 

 

EN 81-41:2010

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

 

 

EN 81-43:2009

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes

 

 

EN 115-1:2008+A1:2010

Safety of escalators and moving walks - Part 1: Construction and installation

EN 115-1:2008

Note 2.1 

Date expired
(30/09/2010) 

EN 201:2009

Plastics and rubber machines - Injection moulding machines - Safety requirements

 

 

EN 267:2009+A1:2011

Automatic forced draught burners for liquid fuels

EN 267:2009

Note 2.1 

Date expired
(29/02/2012) 

EN 280:2001+A2:2009

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

 

 

EN 289:2004+A1:2008

Plastics and rubber machines - Presses - Safety requirements

 

 

EN 349:1993+A1:2008

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

 

 

EN 378-2:2008+A1:2009

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

 

 

EN 415-1:2000+A1:2009

Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment

 

 

EN 415-3:1999+A1:2009

Safety of packaging machines - Part 3: Form, fill and seal machines

 

 

EN 415-5:2006+A1:2009

Safety of packaging machines - Part 5: Wrapping machines

 

 

EN 415-6:2006+A1:2009

Safety of packaging machines - Part 6: Pallet wrapping machines

 

 

EN 415-7:2006+A1:2008

Safety of packaging machines - Part 7: Group and secondary packaging machines

 

 

EN 415-8:2008

Safety of packaging machines - Part 8: Strapping machines

 

 

EN 415-9:2009

Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3

 

 

EN 422:2009

Plastics and rubber machines - Blow moulding machines - Safety requirements

 

 

EN 453:2000+A1:2009

Food processing machinery - Dough mixers - Safety and hygiene requirements

 

 

EN 454:2000+A1:2009

Food processing machinery - Planetary mixers - Safety and hygiene requirements

 

 

EN 474-1:2006+A1:2009

Earth-moving machinery - Safety - Part 1: General requirements

 

 

EN 474-2:2006+A1:2008

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

 

 

EN 474-3:2006+A1:2009

Earth-moving machinery - Safety - Part 3: Requirements for loaders

 

 

EN 474-4:2006+A2:2012

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

 

 

EN 474-5:2006+A2:2012

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

 

 

EN 474-6:2006+A1:2009

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

 

 

EN 474-7:2006+A1:2009

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

 

 

EN 474-8:2006+A1:2009

Earth-moving machinery - Safety - Part 8: Requirements for graders

 

 

EN 474-9:2006+A1:2009

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

 

 

EN 474-10:2006+A1:2009

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

 

 

EN 474-11:2006+A1:2008

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

 

 

EN 474-12:2006+A1:2008

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

 

 

EN 500-1:2006+A1:2009

Mobile road construction machinery - Safety - Part 1: Common requirements

 

 

EN 500-2:2006+A1:2008

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

 

 

EN 500-3:2006+A1:2008

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines

 

 

EN 500-4:2011

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

EN 500-4:2006+A1:2009

Note 2.1 

Date expired
(31/08/2011) 

EN 500-6:2006+A1:2008

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers

 

 

EN 528:2008

Rail dependent storage and retrieval equipment - Safety requirements

 

 

EN 547-1:1996+A1:2008

Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery

 

 

EN 547-2:1996+A1:2008

Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings

 

 

EN 547-3:1996+A1:2008

Safety of machinery - Human body measurements - Part 3: Anthropometric data

 

 

EN 574:1996+A1:2008

Safety of machinery - Two-hand control devices - Functional aspects - Principles for design

 

 

EN 609-1:1999+A2:2009

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

 

 

EN 609-2:1999+A1:2009

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

 

 

EN 614-1:2006+A1:2009

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles

 

 

EN 614-2:2000+A1:2008

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks

 

 

EN 617:2001+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

 

 

EN 618:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

 

 

EN 619:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

 

 

EN 620:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

 

 

EN 626-1:1994+A1:2008

Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers

 

 

EN 626-2:1996+A1:2008

Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures

 

 

EN 676:2003+A2:2008

Automatic forced draught burners for gaseous fuels

 

 

EN 676:2003+A2:2008/AC:2008

EN 690:1994+A1:2009

Agricultural machinery - Manure spreaders - Safety

 

 

EN 692:2005+A1:2009

Machine tools - Mechanical presses - Safety

 

 

EN 693:2001+A2:2011

Machine tools - Safety - Hydraulic presses

EN 693:2001+A1:2009

Note 2.1 

Date expired
(31/03/2012) 

EN 703:2004+A1:2009

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

 

 

EN 706:1996+A1:2009

Agricultural machinery - Vine shoot tipping machines - Safety

 

 

EN 707:1999+A1:2009

Agricultural machinery - Slurry tankers - Safety

 

 

EN 709:1997+A4:2009

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

EN 709:1997+A2:2009

Note 2.1 

Date expired
(31/12/2010) 

EN 710:1997+A1:2010

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

 

 

EN 741:2000+A1:2010

Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials

 

 

EN 745:1999+A1:2009

Agricultural machinery - Rotary mowers and flail-mowers - Safety

 

 

EN 746-1:1997+A1:2009

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

 

 

EN 746-2:2010

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems

 

 

EN 746-3:1997+A1:2009

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

 

 

EN 786:1996+A2:2009

Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety

 

 

EN 791:1995+A1:2009

Drill rigs - Safety

 

 

EN 792-7:2001+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders

 

 

EN 792-12:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws

 

 

EN 792-13:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

 

 

EN 809:1998+A1:2009

Pumps and pump units for liquids - Common safety requirements

 

 

EN 809:1998+A1:2009/AC:2010

EN 815:1996+A2:2008

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements

 

 

EN 818-1:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

 

 

EN 818-2:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

 

 

EN 818-3:1999+A1:2008

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

 

 

EN 818-4:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

 

 

EN 818-5:1999+A1:2008

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

 

 

EN 818-6:2000+A1:2008

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

 

 

EN 818-7:2002+A1:2008

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

 

 

EN 836:1997+A4:2011

Garden equipment - Powered lawnmowers - Safety

 

 

EN 842:1996+A1:2008

Safety of machinery - Visual danger signals - General requirements, design and testing

 

 

EN 848-1:2007+A1:2009

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines

 

 

EN 848-2:2007+A1:2009

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines

 

 

EN 848-3:2007+A2:2009

Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines

 

 

EN 859:2007+A1:2009

Safety of woodworking machines - Hand fed surface planing machines

 

 

EN 860:2007+A1:2009

Safety of woodworking machines - One side thickness planing machines

 

 

EN 861:2007+A1:2009

Safety of woodworking machines - Surface planing and thicknessing machines

 

 

EN 869:2006+A1:2009

Safety of machinery - Safety requirements for pressure metal diecasting units

 

 

EN 894-1:1997+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

 

 

EN 894-2:1997+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays

 

 

EN 894-3:2000+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

 

 

EN 894-4:2010

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators

 

 

EN 908:1999+A1:2009

Agricultural and forestry machinery - Reel machines for irrigation - Safety

 

 

EN 909:1998+A1:2009

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety

 

 

EN 930:1997+A2:2009

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

 

 

EN 931:1997+A2:2009

Footwear manufacturing machines - Lasting machines - Safety requirements

 

 

EN 940:2009+A1:2012 (new)

Safety of woodworking machines - Combined woodworking machines

EN 940:2009

Note 2.1 

31/08/2012 

EN 953:1997+A1:2009

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards

 

 

EN 972:1998+A1:2010

Tannery machines - Reciprocating roller machines - Safety requirements

 

 

EN 972:1998+A1:2010/AC:2011

EN 981:1996+A1:2008

Safety of machinery - System of auditory and visual danger and information signals

 

 

EN 996:1995+A3:2009

Piling equipment - Safety requirements

 

 

EN 1005-1:2001+A1:2008

Safety of machinery - Human physical performance - Part 1: Terms and definitions

 

 

EN 1005-2:2003+A1:2008

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

 

 

EN 1005-3:2002+A1:2008

Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation

 

 

EN 1005-4:2005+A1:2008

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery

 

 

EN 1010-1:2004+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

 

 

EN 1010-2:2006+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

 

 

EN 1010-3:2002+A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines

 

 

EN 1010-4:2004+A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

 

 

EN 1012-1:2010

Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors

 

 

EN 1012-2:1996+A1:2009

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

 

 

EN 1028-1:2002+A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

 

 

EN 1028-2:2002+A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

 

 

EN 1032:2003+A1:2008

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

 

 

EN 1034-1:2000+A1:2010

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

 

 

EN 1034-2:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

 

 

EN 1034-3:2011

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders

EN 1034-3:1999+A1:2009

Note 2.1 

30/06/2012 

EN 1034-4:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

 

 

EN 1034-5:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

 

 

EN 1034-6:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

 

 

EN 1034-7:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

 

 

EN 1034-8:2012 (new)

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants

 

 

EN 1034-13:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

 

 

EN 1034-14:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter

 

 

EN 1034-16:2012 (new)

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines

 

 

EN 1034-22:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders

 

 

EN 1037:1995+A1:2008

Safety of machinery - Prevention of unexpected start-up

 

 

EN 1088:1995+A2:2008

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection

 

 

EN 1093-1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods

 

 

EN 1093-2:2006+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

 

 

EN 1093-3:2006+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

 

 

EN 1093-4:1996+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method

 

 

EN 1093-6:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

 

 

EN 1093-7:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet

 

 

EN 1093-8:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method

 

 

EN 1093-9:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method

 

 

EN 1093-11:2001+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index

 

 

EN 1114-1:2011

Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders

 

 

EN 1114-3:2001+A1:2008

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

 

 

EN 1127-1:2011

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

EN 1127-1:2007

Note 2.1 

31/07/2014 

EN 1127-2:2002+A1:2008

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

 

 

EN 1175-1:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks

 

 

EN 1175-2:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

 

 

EN 1175-3:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks

 

 

EN 1218-1:1999+A1:2009

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

 

 

EN 1218-2:2004+A1:2009

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains

 

 

EN 1218-3:2001+A1:2009

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

 

 

EN 1218-4:2004+A2:2009

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)

 

 

EN 1218-5:2004+A1:2009

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain

 

 

EN 1247:2004+A1:2010

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines

 

 

EN 1248:2001+A1:2009

Foundry machinery - Safety requirements for abrasive blasting equipment

 

 

EN 1265:1999+A1:2008

Safety of machinery - Noise test code for foundry machines and equipment

 

 

EN 1299:1997+A1:2008

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

 

 

EN 1374:2000+A1:2010

Agricultural machinery - Silos stationary unloaders for round silos - Safety

 

 

EN 1398:2009

Dock levellers - Safety requirements

 

 

EN 1417:1996+A1:2008

Plastics and rubber machines - Two roll mills - Safety requirements

 

 

EN 1417:1996+A1:2008/AC:2009

EN 1459:1998+A3:2012

Safety of industrial trucks - Self-propelled variable reach trucks

 

 

EN 1492-1:2000+A1:2008

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

 

 

EN 1492-2:2000+A1:2008

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use

 

 

EN 1492-4:2004+A1:2008

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

 

 

EN 1493:2010

Vehicle lifts

EN 1493:1998+A1:2008

Note 2.1 

Date expired
(04/08/2011) 

EN 1494:2000+A1:2008

Mobile or movable jacks and associated lifting equipment

 

 

EN 1495:1997+A2:2009

Lifting platforms - Mast climbing work platforms

 

 

EN 1495:1997+A2:2009/AC:2010

 

EN 1501-1:2011

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

EN 1501-1:1998+A2:2009

Note 2.1 

Date expired
(29/02/2012) 

EN 1501-2:2005+A1:2009

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

 

 

EN 1501-3:2008

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

 

 

EN 1501-4:2007

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles

 

 

EN 1501-5:2011

Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles

EN 1501-1:1998+A2:2009

Note 2.1 

Date expired
(29/02/2012) 

EN 1526:1997+A1:2008

Safety of industrial trucks - Additional requirements for automated functions on trucks

 

 

EN 1539:2009

Dryers and ovens, in which flammable substances are released - Safety requirements

 

 

EN 1547:2001+A1:2009

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

 

 

EN 1550:1997+A1:2008

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

 

 

EN 1570-1:2011

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

EN 1570:1998+A2:2009

Note 2.1 

Date expired
(30/04/2012) 

EN 1612-1:1997+A1:2008

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units

 

 

EN 1672-2:2005+A1:2009

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

 

 

EN 1673:2000+A1:2009

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

 

 

EN 1674:2000+A1:2009

Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements

 

 

EN 1677-1:2000+A1:2008

Components for slings - Safety - Part 1: Forged steel components, Grade 8

 

 

EN 1677-2:2000+A1:2008

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

 

 

EN 1677-3:2001+A1:2008

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

 

 

EN 1677-4:2000+A1:2008

Components for slings - Safety - Part 4: Links, Grade 8

 

 

EN 1677-5:2001+A1:2008

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

 

 

EN 1677-6:2001+A1:2008

Components for slings - Safety - Part 6: Links - Grade 4

 

 

EN 1678:1998+A1:2010

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

 

 

EN 1679-1:1998+A1:2011

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

 

 

EN 1710:2005+A1:2008

Equipment and components intended for use in potentially explosive atmospheres in underground mines

 

 

EN 1710:2005+A1:2008/AC:2010

EN 1755:2000+A1:2009

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust

 

 

EN 1756-1:2001+A1:2008

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

 

 

EN 1756-2:2004+A1:2009

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers

 

 

EN 1760-1:1997+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

 

 

EN 1760-2:2001+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars

 

 

EN 1760-3:2004+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices

 

 

EN 1777:2010

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

EN 1777:2004+A1:2009

Note 2.1 

Date expired
(30/09/2010) 

EN 1804-1:2001+A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements

 

 

EN 1804-2:2001+A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

 

 

EN 1804-3:2006+A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems

 

 

EN 1807:1999+A1:2009

Safety of woodworking machines - Band sawing machines

 

 

EN 1808:1999+A1:2010

Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests

 

 

EN 1829-1:2010

High pressure water jet machines - Safety requirements - Part 1: Machines

 

 

EN 1829-2:2008

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

 

 

EN 1829-2:2008/AC:2011

EN 1837:1999+A1:2009

Safety of machinery - Integral lighting of machines

 

 

EN 1845:2007

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

 

 

EN 1846-2:2009

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

EN 1846-2:2001+A3:2009

Note 2.1 

Date expired
(28/02/2011) 

EN 1846-3:2002+A1:2008

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance

 

 

EN 1853:1999+A1:2009

Agricultural machinery - Trailers with tipping body - Safety

 

 

EN 1870-1:2007+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

 

 

EN 1870-3:2001+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

 

 

EN 1870-4:2012 (new)

Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading

EN 1870-4:2001+A1:2009

Note 2.1 

30/09/2012 

EN 1870-5:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

 

 

EN 1870-6:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

 

 

EN 1870-7:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

 

 

EN 1870-8:2001+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

 

 

EN 1870-9:2000+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

 

 

EN 1870-10:2003+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

 

 

EN 1870-11:2003+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

 

 

EN 1870-12:2003+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

 

 

EN 1870-13:2007+A2:2012 (new)

Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines

EN 1870-13:2007+A1:2009

Note 2.1 

30/09/2012 

EN 1870-14:2007+A2:2012 (new)

Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines

EN 1870-14:2007+A1:2009

Note 2.1 

30/09/2012 

EN 1870-15:2004+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

 

 

EN 1870-16:2005+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting

 

 

EN 1870-17:2007+A2:2009

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)

 

 

EN 1889-1:2011

Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles

 

 

EN 1889-2:2003+A1:2009

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives

 

 

EN 1915-1:2001+A1:2009

Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements

 

 

EN 1915-2:2001+A1:2009

Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods

 

 

EN 1915-3:2004+A1:2009

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction

 

 

EN 1915-4:2004+A1:2009

Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction

 

 

EN 1953:1998+A1:2009

Atomising and spraying equipment for coating materials - Safety requirements

 

 

EN 1974:1998+A1:2009

Food processing machinery - Slicing machines - Safety and hygiene requirements

 

 

EN ISO 2151:2008

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)

 

 

EN ISO 2860:2008

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

 

 

EN ISO 2867:2011

Earth-moving machinery - Access systems (ISO 2867:2011)

EN ISO 2867:2008

Note 2.1 

31/07/2014 

EN ISO 3164:2008

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)

 

 

EN ISO 3266:2010

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

 

 

EN ISO 3411:2007

Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

 

 

EN ISO 3449:2008

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

 

 

EN ISO 3450:2011

Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)

EN ISO 3450:2008

Note 2.1 

Date expired
(31/05/2012) 

EN ISO 3457:2008

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

 

 

EN ISO 3471:2008

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)

 

 

EN ISO 3741:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)

EN ISO 3741:2009

Note 2.1 

Date expired
(30/04/2011) 

EN ISO 3743-1:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

EN ISO 3743-1:2009

Note 2.1 

Date expired
(30/04/2011) 

EN ISO 3743-2:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

 

 

EN ISO 3744:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

EN ISO 3744:2009

Note 2.1 

Date expired
(30/04/2011) 

EN ISO 3745:2012 (new)

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

EN ISO 3745:2009

Note 2.1 

30/09/2012 

EN ISO 3746:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

EN ISO 3746:2009

Note 2.1 

Date expired
(30/06/2011) 

EN ISO 3747:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

EN ISO 3747:2009

Note 2.1 

Date expired
(30/06/2011) 

EN ISO 4254-1:2009

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)

 

 

EN ISO 4254-1:2009/AC:2010

EN ISO 4254-5:2009

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

 

 

EN ISO 4254-5:2009/AC:2011

EN ISO 4254-6:2009

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

 

 

EN ISO 4254-6:2009/AC:2010

EN ISO 4254-7:2009

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

 

 

EN ISO 4254-7:2009/AC:2010

EN ISO 4254-10:2009

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

 

 

EN ISO 4254-10:2009/AC:2010

EN ISO 4254-11:2010

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

EN 704:1999+A1:2009

Note 2.1 

Date expired
(30/06/2011) 

EN ISO 4413:2010

Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)

EN 982:1996+A1:2008

Note 2.1 

Date expired
(30/11/2011) 

EN ISO 4414:2010

Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)

EN 983:1996+A1:2008

Note 2.1 

Date expired
(30/11/2011) 

EN ISO 4871:2009

Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

 

 

EN ISO 5136:2009

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

 

 

EN ISO 5674:2009

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

 

 

EN ISO 6682:2008

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

 

 

EN ISO 6683:2008

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

 

 

EN ISO 7096:2008

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

 

 

EN ISO 7096:2008/AC:2009

EN ISO 7235:2009

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

 

 

EN ISO 7731:2008

Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)

 

 

EN ISO 8230-1:2008

Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)

 

 

EN ISO 8230-2:2008

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

 

 

EN ISO 8230-3:2008

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

 

 

EN ISO 9614-1:2009

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)

 

 

EN ISO 9614-3:2009

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

 

 

EN ISO 9902-1:2001

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

 

 

EN ISO 9902-1:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 9902-2:2001

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)

 

 

EN ISO 9902-2:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 9902-3:2001

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

 

 

EN ISO 9902-3:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 9902-4:2001

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)

 

 

EN ISO 9902-4:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 9902-5:2001

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)

 

 

EN ISO 9902-5:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 9902-6:2001

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)

 

 

EN ISO 9902-6:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 9902-7:2001

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)

 

 

EN ISO 9902-7:2001/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 10218-1:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)

EN ISO 10218-1:2008

Note 2.1 

01/01/2013 

EN ISO 10218-2:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

 

 

EN ISO 10472-1:2008

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

 

 

EN ISO 10472-2:2008

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

 

 

EN ISO 10472-3:2008

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

 

 

EN ISO 10472-4:2008

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

 

 

EN ISO 10472-5:2008

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

 

 

EN ISO 10472-6:2008

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

 

 

EN ISO 10517:2009

Powered hand-held hedge trimmers - Safety (ISO 10517:2009)

 

 

EN ISO 10821:2005

Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

 

 

EN ISO 10821:2005/A1:2009

Note 3 

Date expired
(28/12/2009) 

EN ISO 11102-1:2009

Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)

 

 

EN ISO 11102-2:2009

Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)

 

 

EN ISO 11111-1:2009

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009)

 

 

EN ISO 11111-2:2005

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)

 

 

EN ISO 11111-2:2005/A1:2009

Note 3 

Date expired
(31/01/2010) 

EN ISO 11111-3:2005

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

 

 

EN ISO 11111-3:2005/A1:2009

Note 3 

Date expired
(31/01/2010) 

EN ISO 11111-4:2005

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)

 

 

EN ISO 11111-4:2005/A1:2009

Note 3 

Date expired
(31/01/2010) 

EN ISO 11111-5:2005

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)

 

 

EN ISO 11111-5:2005/A1:2009

Note 3 

Date expired
(31/01/2010) 

EN ISO 11111-6:2005

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)

 

 

EN ISO 11111-6:2005/A1:2009

Note 3 

Date expired
(31/01/2010) 

EN ISO 11111-7:2005

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)

 

 

EN ISO 11111-7:2005/A1:2009

Note 3 

Date expired
(31/01/2010) 

EN ISO 11145:2008

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)

 

 

EN ISO 11148-2:2011

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)

EN 792-2:2000+A1:2008

Note 2.1 

30/06/2012 

EN ISO 11148-3:2010

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010)

EN 792-3:2000+A1:2008

Note 2.1 

Date expired
(30/04/2011) 

EN ISO 11148-4:2010

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2010)

EN 792-4:2000+A1:2008

Note 2.1 

Date expired
(30/04/2011) 

EN ISO 11148-5:2011

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

EN 792-5:2000+A1:2008

Note 2.1 

30/06/2012 

EN ISO 11148-6:2010

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)

EN 792-6:2000+A1:2008

Note 2.1 

Date expired
(30/04/2011) 

EN ISO 11148-8:2011

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)

EN 792-8:2001+A1:2008

Note 2.1 

30/06/2012 

EN ISO 11148-9:2011

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)

EN 792-9:2001+A1:2008

Note 2.1 

Date expired
(01/06/2012) 

EN ISO 11148-10:2011

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)

EN 792-10:2000+A1:2008

Note 2.1 

30/06/2012 

EN ISO 11148-11:2011

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

EN 792-11:2000+A1:2008

Note 2.1 

30/06/2012 

EN ISO 11161:2007

Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007)

 

 

EN ISO 11161:2007/A1:2010

Note 3 

Date expired
(30/09/2010) 

EN ISO 11200:2009

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997)

 

 

EN ISO 11201:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)

EN ISO 11201:2009

Note 2.1 

Date expired
(30/11/2010) 

EN ISO 11202:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

EN ISO 11202:2009

Note 2.1 

Date expired
(30/11/2010) 

EN ISO 11203:2009

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

 

 

EN ISO 11204:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

EN ISO 11204:2009

Note 2.1 

Date expired
(30/11/2010) 

EN ISO 11205:2009

Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)

 

 

EN ISO 11252:2008

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)

 

 

EN ISO 11546-1:2009

Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

 

 

EN ISO 11546-2:2009

Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

 

 

EN ISO 11553-1:2008

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)

 

 

EN ISO 11553-2:2008

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

 

 

EN ISO 11554:2008

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

 

 

EN ISO 11680-1:2011

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)

EN ISO 11680-1:2008

Note 2.1 

30/06/2012 

EN ISO 11680-2:2011

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)

EN ISO 11680-2:2008

Note 2.1 

30/06/2012 

EN ISO 11681-1:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)

EN ISO 11681-1:2008

Note 2.1 

30/06/2012 

EN ISO 11681-2:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)

EN ISO 11681-2:2008

Note 2.1 

30/06/2012 

EN ISO 11688-1:2009

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

 

 

EN ISO 11691:2009

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)

 

 

EN ISO 11806-1:2011

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)

EN ISO 11806:2008

Note 2.1 

 

EN ISO 11806-2:2011

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)

 

 

EN ISO 11850:2011

Machinery for forestry - General safety requirements (ISO 11850:2011)

EN 14861:2004+A1:2009

Note 2.1 

Date expired
(31/05/2012) 

EN ISO 11957:2009

Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)

 

 

EN 12001:2003+A1:2009

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

 

 

EN 12012-1:2007+A1:2008

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators

 

 

EN 12012-3:2001+A1:2008

Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders

 

 

EN 12012-4:2006+A1:2008

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

 

 

EN 12013:2000+A1:2008

Plastics and rubber machines - Internal mixers - Safety requirements

 

 

EN 12016:2004+A1:2008

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

 

 

EN 12041:2000+A1:2009

Food processing machinery - Moulders - Safety and hygiene requirements

 

 

EN 12042:2005+A1:2010

Food processing machinery - Automatic dividers - Safety and hygiene requirements

 

 

EN 12043:2000+A1:2010

Food processing machinery - Intermediate provers - Safety and hygiene requirements

 

 

EN 12044:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

 

 

EN 12053:2001+A1:2008

Safety of industrial trucks - Test methods for measuring noise emissions

 

 

EN 12077-2:1998+A1:2008

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices

 

 

EN ISO 12100:2010

Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)

EN ISO 12100-1:2003
EN ISO 12100-2:2003
EN ISO 14121-1:2007


Note 2.1 

30/11/2013 

EN 12110:2002+A1:2008

Tunnelling machines - Air locks - Safety requirements

 

 

EN 12111:2002+A1:2009

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

 

 

EN 12158-1:2000+A1:2010

Builders' hoists for goods - Part 1: Hoists with accessible platforms

 

 

EN 12158-2:2000+A1:2010

Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices

 

 

EN 12159:2000+A1:2009

Builders hoists for persons and materials with vertically guided cages

 

 

EN 12162:2001+A1:2009

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

 

 

EN 12198-1:2000+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles

 

 

EN 12198-2:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure

 

 

EN 12198-3:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

 

 

EN 12203:2003+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

 

 

EN 12254:2010

Screens for laser working places - Safety requirements and testing

EN 12254:1998+A2:2008

Note 2.1 

Date expired
(30/09/2010) 

EN 12254:2010/AC:2011

EN 12267:2003+A1:2010

Food processing machinery - Circular saw machines - Safety and hygiene requirements

 

 

EN 12268:2003+A1:2010

Food processing machinery - Band saw machines - Safety and hygiene requirements

 

 

EN 12301:2000+A1:2008

Plastics and rubber machines - Calenders - Safety requirements

 

 

EN 12312-1:2001+A1:2009

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

 

 

EN 12312-2:2002+A1:2009

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

 

 

EN 12312-3:2003+A1:2009

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

 

 

EN 12312-4:2003+A1:2009

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

 

 

EN 12312-5:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

 

 

EN 12312-6:2004+A1:2009

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment

 

 

EN 12312-7:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment

 

 

EN 12312-8:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms

 

 

EN 12312-9:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders

 

 

 

EN 12312-10:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

 

 

EN 12312-12:2002+A1:2009

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment

 

 

EN 12312-13:2002+A1:2009

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

 

 

EN 12312-14:2006+A1:2009

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles

 

 

EN 12312-15:2006+A1:2009

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors

 

 

EN 12312-16:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

 

 

EN 12312-17:2004+A1:2009

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment

 

 

EN 12312-18:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units

 

 

EN 12312-19:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions

 

 

EN 12312-20:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

 

 

EN 12321:2003+A1:2009

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

 

 

EN 12331:2003+A2:2010

Food processing machinery - Mincing machines - Safety and hygiene requirements

 

 

EN 12336:2005+A1:2008

Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements

 

 

EN 12348:2000+A1:2009

Core drilling machines on stand - Safety

 

 

EN 12355:2003+A1:2010

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements

 

 

EN 12385-1:2002+A1:2008

Steel wire ropes - Safety - Part 1: General requirements

 

 

EN 12385-2:2002+A1:2008

Steel wire ropes - Safety - Part 2: Definitions, designation and classification

 

 

EN 12385-3:2004+A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

 

 

EN 12385-4:2002+A1:2008

Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

 

 

EN 12385-10:2003+A1:2008

Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications

 

 

EN 12387:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

 

 

EN 12409:2008+A1:2011

Plastics and rubber machines - Thermoforming machines - Safety requirements

EN 12409:2008

Note 2.1 

Date expired
(30/04/2012) 

EN 12417:2001+A2:2009

Machine tools - Safety - Machining centres

 

 

EN 12417:2001+A2:2009/AC:2010

EN 12418:2000+A1:2009

Masonry and stone cutting-off machines for job site - Safety

 

 

EN 12463:2004+A1:2011

Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements

 

 

EN 12505:2000+A1:2009

Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements

 

 

EN 12525:2000+A2:2010

Agricultural machinery - Front loaders - Safety

 

 

EN 12545:2000+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

 

 

EN 12547:1999+A1:2009

Centrifuges - Common safety requirements

 

 

EN 12549:1999+A1:2008

Acoustics - Noise test code for fastener driving tools - Engineering method

 

 

EN 12581:2005+A1:2010

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements

 

 

EN 12601:2010

Reciprocating internal combustion engine driven generating sets - Safety

 

 

EN 12621:2006+A1:2010

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

 

 

EN 12622:2009

Safety of machine tools - Hydraulic press brakes

 

 

EN 12629-1:2000+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements

 

 

EN 12629-2:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines

 

 

EN 12629-3:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines

 

 

EN 12629-4:2001+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines

 

 

EN 12629-5-1:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis

 

 

EN 12629-5-2:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis

 

 

EN 12629-5-3:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines

 

 

EN 12629-5-4:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines

 

 

EN 12629-6:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

 

 

EN 12629-7:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

 

 

EN 12629-8:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

 

 

EN 12635:2002+A1:2008

Industrial, commercial and garage doors and gates - Installation and use

 

 

EN 12643:1997+A1:2008

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)

 

 

EN 12644-1:2001+A1:2008

Cranes - Information for use and testing - Part 1: Instructions

 

 

EN 12644-2:2000+A1:2008

Cranes - Information for use and testing - Part 2: Marking

 

 

EN 12649:2008+A1:2011

Concrete compactors and smoothing machines - Safety

EN 12649:2008

Note 2.1 

Date expired
(31/01/2012) 

EN 12653:1999+A2:2009

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

 

 

EN 12693:2008

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors

 

 

EN 12717:2001+A1:2009

Safety of machine tools - Drilling machines

 

 

EN 12733:2001+A1:2009

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

 

 

EN 12750:2001+A1:2009

Safety of woodworking machines - Four-sided moulding machines

 

 

EN 12753:2005+A1:2010

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

 

 

EN 12757-1:2005+A1:2010

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

 

 

EN 12779:2004+A1:2009

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements

 

 

EN 12851:2005+A1:2010

Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements

 

 

EN 12852:2001+A1:2010

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

 

 

EN 12853:2001+A1:2010

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

 

 

EN 12853:2001+A1:2010/AC:2010

EN 12854:2003+A1:2010

Food processing machinery - Beam mixers - Safety and hygiene requirements

 

 

EN 12855:2003+A1:2010

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

 

 

EN 12881-1:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

 

 

EN 12881-2:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

 

 

EN 12882:2008

Conveyor belts for general purpose use - Electrical and flammability safety requirements

 

 

EN 12921-1:2005+A1:2010

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

 

 

EN 12921-2:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

 

 

EN 12921-3:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

 

 

EN 12921-4:2005+A1:2008

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

 

 

EN 12957:2001+A1:2009

Machine tools - Safety - Electro discharge machines

 

 

EN 12965:2003+A2:2009

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

 

 

EN 12978:2003+A1:2009

Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods

 

 

EN 12981:2005+A1:2009

Coating plants - Spray booths for application of organic powder coating material - Safety requirements

 

 

EN 12984:2005+A1:2010

Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements

 

 

EN 12999:2011

Cranes - Loader cranes

 

 

EN 13000:2010

Cranes - Mobile cranes

 

 

EN 13000:2010/AC:2010

EN 13001-1:2004+A1:2009

Cranes - General design - Part 1: General principles and requirements

 

 

EN 13001-1:2004+A1:2009/AC:2009

EN 13001-2:2011

Crane safety - General design - Part 2: Load actions

EN 13001-2:2004+A3:2009

Note 2.1 

Date expired
(18/11/2011) 

EN 13001-2:2011/AC:2012 (new)

EN 13001-3-1:2012 (new)

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

 

 

EN 13015:2001+A1:2008

Maintenance for lifts and escalators - Rules for maintenance instructions

 

 

EN 13019:2001+A1:2008

Machines for road surface cleaning - Safety requirements

 

 

EN 13020:2004+A1:2010

Road surface treatment machines - Safety requirements

 

 

EN 13021:2003+A1:2008

Winter service machines - Safety requirements

 

 

EN 13023:2003+A1:2010

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3

 

 

EN 13035-1:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

 

 

EN 13035-2:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory

 

 

EN 13035-3:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

 

 

EN 13035-3:2003+A1:2009/AC:2010

EN 13035-4:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

 

 

EN 13035-5:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

 

 

EN 13035-6:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out

 

 

EN 13035-7:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

 

 

EN 13035-9:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

 

 

EN 13035-11:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

 

 

EN 13042-1:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

 

 

EN 13042-2:2004+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

 

 

EN 13042-3:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

 

 

EN 13042-5:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

 

 

EN 13059:2002+A1:2008

Safety of industrial trucks - Test methods for measuring vibration

 

 

EN 13102:2005+A1:2008

Ceramic machines - Safety - Loading and unloading of fine clay tiles

 

 

EN 13112:2002+A1:2009

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

 

 

EN 13113:2002+A1:2010

Tannery machines - Roller coating machines - Safety requirements

 

 

EN 13114:2002+A1:2009

Tannery machines - Rotating process vessels - Safety requirements

 

 

EN 13118:2000+A1:2009

Agricultural machinery - Potato harvesting equipment - Safety

 

 

EN 13120:2009

Internal blinds - Performance requirements including safety

 

 

EN 13128:2001+A2:2009

Safety of machine tools - Milling machines (including boring machines)

 

 

EN 13128:2001+A2:2009/AC:2010

EN 13135-1:2003+A1:2010

Cranes - Equipment - Part 1: Electrotechnical equipment

 

 

EN 13135-2:2004+A1:2010

Cranes - Equipment - Part 2: Non-electrotechnical equipment

 

 

EN 13140:2000+A1:2009

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

 

 

EN 13155:2003+A2:2009

Cranes - Safety - Non-fixed load lifting attachments

 

 

EN 13157:2004+A1:2009

Cranes - Safety - Hand powered cranes

 

 

EN 13208:2003+A1:2010

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

 

 

EN 13218:2002+A1:2008

Machine tools - Safety - Stationary grinding machines

 

 

EN 13218:2002+A1:2008/AC:2010

EN 13241-1:2003+A1:2011

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics

 

 

EN 13288:2005+A1:2009

Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements

 

 

EN 13355:2004+A1:2009

Coating plants - Combined booths - Safety requirements

 

 

EN 13367:2005+A1:2008

Ceramic machines - Safety - Transfer platforms and cars

 

 

EN 13367:2005+A1:2008/AC:2009

EN 13389:2005+A1:2009

Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements

 

 

EN 13390:2002+A1:2009

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

 

 

EN 13411-1:2002+A1:2008

Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings

 

 

EN 13411-2:2001+A1:2008

Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings

 

 

EN 13411-3:2004+A1:2008

Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing

 

 

EN 13411-4:2011

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

EN 13411-4:2002+A1:2008

Note 2.1 

Date expired
(30/09/2011) 

EN 13411-5:2003+A1:2008

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

 

 

EN 13411-6:2004+A1:2008

Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

 

 

EN 13411-7:2006+A1:2008

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

 

 

EN 13411-8:2011

Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging

 

 

EN 13414-1:2003+A2:2008

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

 

 

EN 13414-2:2003+A2:2008

Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer

 

 

EN 13414-3:2003+A1:2008

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

 

 

EN 13418:2004+A1:2008

Plastics and rubber machines - Winding machines for film or sheet - Safety requirements

 

 

EN 13448:2001+A1:2009

Agricultural and forestry machinery - Inter-row mowing units - Safety

 

 

EN 13457:2004+A1:2010

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements

 

 

EN 13478:2001+A1:2008

Safety of machinery - Fire prevention and protection

 

 

EN 13490:2001+A1:2008

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

 

 

EN 13524:2003+A1:2009

Highway maintenance machines - Safety requirements

 

 

EN 13525:2005+A2:2009

Forestry machinery - Wood chippers - Safety

 

 

EN 13531:2001+A1:2008

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)

 

 

EN 13534:2006+A1:2010

Food processing machinery - Curing injection machines - Safety and hygiene requirements

 

 

EN 13557:2003+A2:2008

Cranes - Controls and control stations

 

 

EN 13561:2004+A1:2008

External blinds - Performance requirements including safety

 

 

EN 13570:2005+A1:2010

Food processing machinery - Mixing machines - Safety and hygiene requirements

 

 

EN 13586:2004+A1:2008

Cranes - Access

 

 

EN 13591:2005+A1:2009

Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements

 

 

EN 13617-1:2004+A1:2009

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

 

 

EN 13621:2004+A1:2010

Food processing machinery - Salad dryers - Safety and hygiene requirements

 

 

EN 13659:2004+A1:2008

Shutters - Performance requirements including safety

 

 

EN 13675:2004+A1:2010

Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment

 

 

EN 13683:2003+A2:2011

Garden equipment - Integrally powered shredders/chippers - Safety

 

 

EN 13684:2004+A3:2009

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

EN 13684:2004+A2:2009

Note 2.1 

Date expired
(30/06/2010) 

EN 13731:2007

Lifting bag systems for fire and rescue service use - Safety and performance requirements

 

 

EN 13732:2002+A2:2009

Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene

 

 

EN ISO 13732-1:2008

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)

 

 

EN ISO 13732-3:2008

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)

 

 

EN 13736:2003+A1:2009

Safety of machine tools - Pneumatic presses

 

 

EN ISO 13753:2008

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

 

 

EN ISO 13849-1:2008

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006)

 

Date expired
(31/12/2011) 

EN ISO 13849-1:2008/AC:2009

EN ISO 13849-2:2008

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)

 

 

EN ISO 13850:2008

Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)

 

 

EN ISO 13855:2010

Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)

EN 999:1998+A1:2008

Note 2.1 

Date expired
(30/11/2010) 

EN ISO 13857:2008

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

 

 

EN 13862:2001+A1:2009

Floor cutting-off machines - Safety

 

 

EN 13870:2005+A1:2010

Food processing machinery - Chop cutting machines - Safety and hygiene requirements

 

 

EN 13871:2005+A1:2010

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

 

 

EN 13885:2005+A1:2010

Food processing machinery - Clipping machines - Safety and hygiene requirements

 

 

EN 13886:2005+A1:2010

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

 

 

EN 13889:2003+A1:2008

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

 

 

EN 13898:2003+A1:2009

Machine tools - Safety - Sawing machines for cold metal

 

 

EN 13898:2003+A1:2009/AC:2010

EN 13951:2003+A1:2008

Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use

 

 

EN 13954:2005+A1:2010

Food processing machinery - Bread slicers - Safety and hygiene requirements

 

 

EN 13977:2011

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance

 

 

EN 13985:2003+A1:2009

Machine tools - Safety - Guillotine shears

 

 

EN 14010:2003+A1:2009

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

 

 

EN 14017:2005+A2:2009

Agricultural and forestry machinery - Solid fertilizer distributors - Safety

EN 14017:2005+A1:2008

Note 2.1 

Date expired
(31/01/2010) 

EN 14018:2005+A1:2009

Agricultural and forestry machinery - Seed drills - Safety

 

 

EN 14033-3:2009+A1:2011

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

EN 14033-3:2009

Note 2.1 

Date expired
(30/04/2012) 

EN 14043:2005+A1:2009

High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods

 

 

EN 14044:2005+A1:2009

High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

 

 

EN 14070:2003+A1:2009

Safety of machine tools - Transfer and special-purpose machines

 

 

EN 14070:2003+A1:2009/AC:2010

EN ISO 14122-1:2001

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)

 

 

EN ISO 14122-1:2001/A1:2010

Note 3 

Date expired
(31/10/2010) 

EN ISO 14122-2:2001

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001)

 

 

EN ISO 14122-2:2001/A1:2010

Note 3 

Date expired
(31/10/2010) 

EN ISO 14122-3:2001

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)

 

 

EN ISO 14122-3:2001/A1:2010

Note 3 

Date expired
(31/10/2010) 

EN ISO 14122-4:2004

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004)

 

 

EN ISO 14122-4:2004/A1:2010

Note 3 

Date expired
(08/04/2011) 

EN ISO 14159:2008

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

 

 

EN 14238:2004+A1:2009

Cranes - Manually controlled load manipulating devices

 

 

EN ISO 14314:2009

Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)

 

 

EN 14439:2006+A2:2009

Cranes - Safety - Tower cranes

 

 

EN 14462:2005+A1:2009

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

 

 

EN 14466:2005+A1:2008

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

 

 

EN 14492-1:2006+A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven winches

 

 

EN 14492-1:2006+A1:2009/AC:2010

EN 14492-2:2006+A1:2009

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

 

 

EN 14492-2:2006+A1:2009/AC:2010

EN 14502-2:2005+A1:2008

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

 

 

EN 14655:2005+A1:2010

Food processing machinery - Baguette slicers - Safety and hygiene requirements

 

 

EN 14656:2006+A1:2010

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals

 

 

EN 14658:2005+A1:2010

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

 

 

EN 14673:2006+A1:2010

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

 

 

EN 14677:2008

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel

 

 

EN 14681:2006+A1:2010

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

 

 

EN 14710-1:2005+A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements

 

 

EN 14710-2:2005+A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements

 

 

EN ISO 14738:2008

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)

 

 

EN 14753:2007

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel

 

 

EN 14886:2008

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements

 

 

EN 14910:2007+A1:2009

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

 

 

EN 14930:2007+A1:2009

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces

 

 

EN 14957:2006+A1:2010

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements

 

 

EN 14958:2006+A1:2009

Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements

 

 

EN 14973:2006+A1:2008

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

 

 

EN ISO 14982:2009

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

 

 

EN 14985:2012

Cranes - Slewing jib cranes

 

 

EN 15000:2008

Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

 

 

EN 15011:2011

Cranes - Bridge and gantry cranes

 

 

EN 15027:2007+A1:2009

Transportable wall saw and wire saw equipment for job site - Safety

 

 

EN 15056:2006+A1:2009

Cranes - Requirements for container handling spreaders

 

 

EN 15059:2009

Snow grooming equipment - Safety requirements

 

 

EN 15061:2007+A1:2008

Safety of machinery - Safety requirements for strip processing line machinery and equipment

 

 

EN 15067:2007

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements

 

 

EN 15093:2008

Safety of Machinery - Safety requirements for hot flat rolling mills

 

 

EN 15094:2008

Safety of Machinery - Safety requirements for cold flat rolling mills

 

 

EN 15095:2007+A1:2008

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

 

 

EN 15162:2008

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

 

 

EN 15163:2008

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

 

 

EN 15164:2008

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

 

 

EN 15166:2008

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

 

 

EN 15268:2008

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

 

 

EN 15503:2009

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

 

 

EN ISO 15536-1:2008

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

 

 

EN 15695-1:2009

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

 

 

EN 15695-2:2009

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

 

 

EN 15700:2011

Safety for conveyor belts for winter sport or leisure use

 

 

EN ISO 15744:2008

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)

 

 

EN 15746-2:2010+A1:2011

Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

EN 15746-2:2010

Note 2.1 

Date expired
(30/04/2012) 

EN 15774:2010

Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements

 

 

EN 15811:2009

Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified)

 

 

EN 15811:2009/AC:2010

EN 15895:2011

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

 

 

EN 15949:2012 (new)

Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills

 

 

EN 15967:2011

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

 

 

EN 15997:2011

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

 

 

EN ISO 19432:2008

Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)

 

 

EN ISO 20361:2009

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007)

 

 

EN ISO 20361:2009/AC:2010

EN ISO 20643:2008

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)

 

 

EN ISO 22867:2011

Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)

EN ISO 22867:2008

Note 2.1 

30/06/2012 

EN ISO 22868:2011

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)

EN ISO 22868:2008

Note 2.1 

Date expired
(30/09/2011) 

EN ISO 23125:2010

Machine tools - Safety - Turning machines (ISO 23125:2010)

 

 

EN ISO 28139:2009

Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)

 

 

EN ISO 28927-1:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)

 

 

EN ISO 28927-2:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

 

 

EN ISO 28927-3:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)

 

 

EN ISO 28927-4:2010

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)

 

 

EN ISO 28927-5:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)

 

 

EN ISO 28927-6:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)

 

 

EN ISO 28927-7:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)

 

 

EN ISO 28927-8:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)

 

 

EN ISO 28927-9:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)

 

 

EN ISO 28927-10:2011

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)

 

 

EN ISO 28927-11:2011

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011)

 

 

EN 30326-1:1994

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)

 

 

EN 30326-1:1994/A1:2007

Note 3 

Date expired
(28/12/2009) 

EN 30326-1:1994/A2:2011

Note 3 

30/06/2012 

EN 50223:2010

Stationary electrostatic application equipment for ignitable flock material - Safety requirements

 

 

EN 50348:2010

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

 

 

EN 50348:2010/AC:2010

EN 50580:2012 (new)

Safety of hand-held electric motor operated tools -- Particular requirements for spray guns

 

 

EN 60204-1:2006

Safety of machinery - Electrical equipment of machines -- Part 1: General requirements
IEC 60204-1:2005 (Modified)

 

 

EN 60204-1:2006/A1:2009
IEC 60204-1:2005/A1:2008

Note 3 

Date expired
(01/02/2012) 

EN 60204-1:2006/AC:2010

EN 60204-11:2000

Safety of machinery - Electrical equipment of machines -- Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60204-11:2000

 

 

EN 60204-11:2000/AC:2010

EN 60204-32:2008

Safety of machinery - Electrical equipment of machines -- Part 32: Requirements for hoisting machines
IEC 60204-32:2008

 

 

EN 60204-33:2011

Safety of machinery - Electrical equipment of machines -- Part 33: Requirements for semiconductor fabrication equipment
IEC 60204-33:2009 (Modified)

 

 

EN 60335-1:2012 (new)

Household and similar electrical appliances - Safety -- Part 1: General requirements
IEC 60335-1:2010 (Modified)

EN 60335-1:2002
and its amendments

Note 2.1 

21/11/2014 

EN 60335-2-67:2009

Household and similar electrical appliances - Safety -- Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use
IEC 60335-2-67:2002 (Modified) + A1:2005 (Modified)

 

 

EN 60335-2-68:2009

Household and similar electrical appliances - Safety -- Part 2-68: Particular requirements for spray extraction machines for commercial use
IEC 60335-2-68:2002 (Modified) + A1:2005 (Modified) + A2:2007 (Modified)

 

 

EN 60335-2-69:2009

Household and similar electrical appliances - Safety -- Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
IEC 60335-2-69:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified)

 

 

EN 60335-2-72:2009

Household and similar electrical appliances - Safety -- Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use
IEC 60335-2-72:2002 (Modified) + A1:2005 (Modified)

 

 

EN 60335-2-77:2010

Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
IEC 60335-2-77:2002 (Modified)

 

 

EN 60335-2-79:2009

Household and similar electrical appliances - Safety -- Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
IEC 60335-2-79:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified)

 

 

EN 60745-1:2009

Hand-held motor-operated electric tools - Safety -- Part 1: General requirements
IEC 60745-1:2006 (Modified)

 

 

EN 60745-1:2009/A11:2010

Note 3 

01/10/2013 

EN 60745-1:2009/AC:2009

EN 60745-2-1:2010

Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for drills and impact drills
IEC 60745-2-1:2003 (Modified) + A1:2008

 

 

EN 60745-2-2:2010

Hand-held motor-operated electric tools - Safety -- Part 2-2: Particular requirements for screwdrivers and impact wrenches
IEC 60745-2-2:2003 (Modified) + A1:2008

 

 

EN 60745-2-3:2011

Hand-held motor-operated electric tools - Safety -- Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified)

 

 

EN 60745-2-4:2009

Hand-held motor-operated electric tools - Safety -- Part 2-4: Particular requirements for sanders and polishers other than disk type
IEC 60745-2-4:2002 (Modified) + A1:2008 (Modified)

 

 

EN 60745-2-4:2009/A11:2011

Note 3 

14/11/2014 

EN 60745-2-5:2010

Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws
IEC 60745-2-5:2010 (Modified)

 

 

EN 60745-2-6:2010

Hand-held motor-operated electric tools - Safety -- Part 2-6: Particular requirements for hammers
IEC 60745-2-6:2003 (Modified) + A1:2006 + A2:2008

 

 

EN 60745-2-8:2009

Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
IEC 60745-2-8:2003 (Modified) + A1:2008

 

 

EN 60745-2-9:2009

Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers
IEC 60745-2-9:2003 (Modified) + A1:2008

 

 

EN 60745-2-11:2010

Hand-held motor-operated electric tools - Safety -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
IEC 60745-2-11:2003 (Modified) + A1:2008

 

 

EN 60745-2-12:2009

Hand-held motor-operated electric tools - Safety -- Part 2-12: Particular requirements for concrete vibrators
IEC 60745-2-12:2003 (Modified) + A1:2008

 

 

EN 60745-2-13:2009

Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws
IEC 60745-2-13:2006 (Modified)

 

 

EN 60745-2-13:2009/A1:2010
IEC 60745-2-13:2006/A1:2009

Note 3 

01/12/2013 

EN 60745-2-14:2009

Hand-held motor-operated electric tools - Safety -- Part 2-14: Particular requirements for planers
IEC 60745-2-14:2003 (Modified) + A1:2006 (Modified)

 

 

EN 60745-2-14:2009/A2:2010
IEC 60745-2-14:2003/A2:2010

Note 3 

01/06/2013 

EN 60745-2-15:2009

Hand-held motor-operated electric tools - Safety -- Part 2-15: Particular requirements for hedge trimmers
IEC 60745-2-15:2006 (Modified)

 

 

EN 60745-2-16:2010

Hand-held motor-operated electric tools - Safety -- Part 2-16: Particular requirements for tackers
IEC 60745-2-16:2008 (Modified)

 

 

EN 60745-2-17:2010

Hand-held motor-operated electric tools - Safety -- Part 2-17: Particular requirements for routers and trimmers
IEC 60745-2-17:2010 (Modified)

 

 

EN 60745-2-18:2009

Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements for strapping tools
IEC 60745-2-18:2003 (Modified) + A1:2008

 

 

EN 60745-2-19:2009

Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for jointers
IEC 60745-2-19:2005 (Modified)

 

 

EN 60745-2-19:2009/A1:2010
IEC 60745-2-19:2005/A1:2010

Note 3 

01/06/2013 

EN 60745-2-20:2009

Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for band saws
IEC 60745-2-20:2003 (Modified) + A1:2008

 

 

EN 60745-2-21:2009

Hand-held motor-operated electric tools - Safety -- Part 2-21: Particular requirements for drain cleaners
IEC 60745-2-21:2002 (Modified)

 

 

EN 60745-2-21:2009/A1:2010
IEC 60745-2-21:2002/A1:2008

Note 3 

01/12/2013 

EN 60745-2-22:2011

Hand-held motor-operated electric tools - Safety -- Part 2-22: Particular requirements for cut-off machines
IEC 60745-2-22:2011 (Modified)

 

 

EN 61029-1:2009

Safety of transportable motor-operated electric tools -- Part 1: General requirements
IEC 61029-1:1990 (Modified)

 

 

EN 61029-1:2009/A11:2010

Note 3 

01/11/2013 

EN 61029-1:2009/AC:2009

EN 61029-2-1:2010

Safety of transportable motor-operated electric tools -- Part 2-1: Particular requirements for circular saw benches
IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001

 

 

EN 61029-2-3:2011

Safety of transportable motor-operated electric tools -- Part 2-3: Particular requirements for planers and thicknessers
IEC 61029-2-3:1993 (Modified) + A1:2001

 

 

EN 61029-2-4:2011

Safety of transportable motor-operated electric tools -- Part 2-4: Particular requirements for bench grinders
IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified)

 

 

EN 61029-2-6:2010

Safety of transportable motor-operated electric tools -- Part 2-6: Particular requirements for diamond drills with water supply
IEC 61029-2-6:1993 (Modified)

 

 

EN 61029-2-8:2010

Safety of transportable motor-operated electric tools -- Part 2-8: Particular requirements for single spindle vertical moulders
IEC 61029-2-8:1995 (Modified) + A1:1999 + A2:2001

 

 

EN 61029-2-9:2009

Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws
IEC 61029-2-9:1995 (Modified)

 

 

EN 61029-2-10:2010

Safety of transportable motor-operated electric tools -- Part 2-10: Particular requirements for cutting-off grinders
IEC 61029-2-10:1998 (Modified)

 

 

EN 61029-2-11:2009

Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for combined mitre and bench saws
IEC 61029-2-11:2001 (Modified)

 

 

EN 61029-2-12:2011

Safety of transportable motor-operated electric tools -- Part 2-12: Particular requirements for threading machines
IEC 61029-2-12:2010 (Modified)

 

 

EN 61310-1:2008

Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
IEC 61310-1:2007

 

 

EN 61310-2:2008

Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking
IEC 61310-2:2007

 

 

EN 61310-3:2008

Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
IEC 61310-3:2007

 

 

EN 61496-1:2004

Safety of machinery - Electro-sensitive protective equipment -- Part 1: General requirements and tests
IEC 61496-1:2004 (Modified)

 

 

EN 61496-1:2004/A1:2008
IEC 61496-1:2004/A1:2007

Note 3 

Date expired
(01/06/2011) 

EN 61496-1:2004/AC:2010

EN 61800-5-2:2007

Adjustable speed electrical power drive systems -- Part 5-2: Safety requirements - Functional
IEC 61800-5-2:2007

 

 

EN 62061:2005

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 62061:2005

 

 

EN 62061:2005/AC:2010